Uvp BioSpectrum Imaging System Instrukcja Użytkownika

BioSpectrum® Imaging System™ Instruction Guide _______________________

BioSpectrum Imaging System 10 Placing Filter at the Top of the Darkroom Darkroom Filter Setup 1. Ensure that the darkroom is in a fixed and p

BioSpectrum Imaging System 11 Zoom Lens Controller Setup Assemble the lens controller’s connective devices as follows: 1. Ensure that the zoom le

BioSpectrum Imaging System 12 Connecting to a PC and Powering Up the System 1. Connect the USB cable from the computer to the rear exterior of the

BioSpectrum Imaging System 13 Camera Installation High sensitivity, scientific grade CCD cameras are designed for use with UVP’s BioSpectrum Imagin

BioSpectrum Imaging System 14 Hardware Installation 1. Slide the camera and lens assembly into the camera base. The base comes installed to the da

BioSpectrum Imaging System 15 Software Installation Install the Camera Driver 1. Plug in the 90 degree USB cable from the camera into the USB port

BioSpectrum Imaging System 16 Hardware Installation The photograph shows the parts required for assembly of the MegaCam 810 and BioChemi 510 camera

BioSpectrum Imaging System 17 Operation Using the System Caution: In BioSpectrum systems equipped with a motorized lift platform, do not place obje

BioSpectrum Imaging System 18 Camera Control The camera is controlled via VisionWorksLS software by clicking on the Acquisition Action Tab and then

BioSpectrum Imaging System 19 Adjusting the Lift Platform Height BioSpectrum with Automated Lift Platform When using the Automated BioSpectrum, th

BioSpectrum Imaging System 2 Table of Contents Introduction ...

BioSpectrum Imaging System 20 Capturing Images Focusing the Lens Using Image Preview 1. Place the sample or focus target on the surface where the

BioSpectrum Imaging System 21 Service Procedures Return Procedure A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Se

BioSpectrum Imaging System 22 Contact UVP for information on the BioLite MultiSpectral Light Source for directed epi or transillumination fiber opt

BioSpectrum Imaging System 3 Introduction The BioSpectrum Imaging System is designed to automate research with one-touch preset or user-defined PC

BioSpectrum Imaging System 4 Components The BioSpectrum Imaging System is comprised of the following equipment:  Darkroom Cabinet  Automated Fi

BioSpectrum Imaging System 5 Darkroom Cabinet The BioSpectrum Imaging System is constructed of aluminum and is fabricated to provide a light-tigh

BioSpectrum Imaging System 6 Epi Illumination Standard overhead lighting includes 365nm UV, Visi-Blue 480nm and white light. Lighting is controlled

BioSpectrum Imaging System 7 VisionWorks®LS Software VisionWorksLS software controls the darkroom functions and lighting as well as the motorized l

BioSpectrum Imaging System 8 Installation Installing VisionWorksLS Software 1. Insert the VisionWorksLS CD (not network CD) into the computer. 2.

BioSpectrum Imaging System 9 8. If the computer is not connected to the Internet, click Offline activation to register the software. This allows